The Release of New Smartphone Models Promote the Growth of the FPCB Industry
The Release of New Smartphone Models Promote the Growth of the FPCB Industry
  • Korea IT Times (info@koreaittimes.com)
  • 승인 2013.07.12 16:58
  • 댓글 0
이 기사를 공유합니다

Seoul, Korea - Flexible Printed Circuit Board (FPCB) manufacturers gained further growth momentum in the second half, thanks to the release of new smartphone models such as Galaxy Note III, iPhone 5S and Optimus G2. FPCB companies including Interflex, Flexcom, Daeduck GDS and BHFlex showed significant improvement in their performance in the second half. For instance, Interflex witnessed a sharp increase in its revenue by 30% to KRW 290 billion and is sure to turn into surplus with KRW 14 billion of operating profit. Flexcom also gained growth momentum as its production capacity has improved greatly after addressing the causes of sluggish performance in the first half. BHFlex’s revenue topped KRW 100 billion for the first time, and the company’s operating profit amounted to KRW 9 billion. The increased market share of LG Electronics played a part in the growth of BHFLEX, which is one of LG’s core subsidiaries, supplying 40 % of the FPCB for Optimus series. Daeduck GDS also saw a 6-7% increase in its revenue. The main growth engine appears to be the rapid rise in the demand for FPCB for 13 million pixel camera module. “There has been concern over excessive FPCB supply in the first half of this year, because companies made massive investments in FPCB last year, but the new demand source in the digitizer market is expected to balance the supply and demand,” said a person from the industry. 

연성회로기판(FPCB) 업계, 스마트폰 신모델 효과로 2분기 실적 성장세 뚜렷 

연성회로기판(FPCB) 업체들이 1분기 부진을 털고 2분기부터 실적 개선에 속도를 내고 있다. 갤럭시S4가 선보인 데 이어 하반기 갤럭시노트3·아이폰5S·옵티머스G2 등 인기 스마트폰이 잇따라 출시될 것으로 예상돼 FPCB 업체들이 수혜를 톡톡히 볼 것으로 예상된다. 
10일 업계에 따르면 인터플렉스·플렉스컴·대덕GDS·비에이치 등 주요 FPCB 업체의 지난 2분기 실적이 큰 폭으로 개선됐다. 인터플렉스는 지난해 말 출시된 아이폰5가 부진한 판매량을 기록하면서 1분기 실적이 부진했다. 그러나 2분기 갤럭시S4를 시작으로 인기 스마트폰에 잇따라 FPCB를 공급하면서 가파른 상승세로 돌아섰다. 2분기 매출은 2900억원 초반 수준으로 전 분기보다 30%가량 늘어난 것으로 추정된다. 영업이익은 140억원 수준으로 흑자 전환이 확실시된다. 2분기에는 110억원 규모의 터치스크린패널(TSP) 신규 매출까지 더해지면서 하반기 기대감을 높이고 있다. 
플렉스컴도 2분기부터 생산능력 확대 효과가 본격화되면서 실적 상승세에 올라탔다. 2분기 매출은 1800억원 수준으로 전 분기보다 50% 이상 성장했다. 영업이익 추정치는 95억원으로 전 분기 대비 두 배 수준이다. 1분기 실적 부진의 원인이었던 생산 수율 악화와 신공장 안정화 문제도 어느 정도 해결했다. 하반기 갤럭시노트3용 디지타이저 매출이 시작되고, 베트남 공장 가동률도 높아지면 실적 개선 속도는 더욱 빨라질 것으로 보인다. 
비에이치는 지난 2분기 처음으로 1000억원대 매출을 기록한 것으로 추정된다. 영업이익은 90억원에 육박할 것으로 알려졌다. LG전자가 스마트폰 시장에서 점유율을 높이면서 비에이치가 수혜를 톡톡히 본 셈이다. 비에이치는 LG전자 핵심 협력사로 옵티머스 시리즈에 쓰이는 FPCB의 40% 물량을 차지하고 있다. 
대덕GDS는 2분기 매출 1460억원으로 전 분기보다 6~7% 성장한 것으로 추정된다. 지난 1분기 사상 최대 매출을 기록한 데 이어 2분기에서도 기록을 경신할 것으로 보인다. 영업이익은 신제품 효과로 1분기와 비슷한 수준인 것으로 알려졌다. 매출 성장을 견인하는 제품은 1300만 화소 카메라모듈용 FPCB다. 최근 1300만 화소 카메라모듈 시장이 급성장하면서 관련 FPCB 수요도 빠른 속도로 늘고 있다. 카메라모듈 시장 수혜 덕분에 대덕GDS는 올해 2830억원의 FPCB 매출을 기록할 것으로 예상된다. 이는 지난해보다 30% 이상 늘어난 수치다. 
업계 관계자는 “지난해 주요 업체들이 대규모 투자를 단행하면서 올 상반기 FPCB 공급과잉 우려가 있었다”며 “디지타이저 등 새로운 수요 시장이 커지면서 어느 정도 수급을 맞춰갈 것”이라고 말했다. 
이형수기자 goldlion2@etnews.com 
(단위: 억원) 
※자료 : 전자공시시스템 및 업계 취합

**Article provided by etnews [Korea IT News]

[Reference] : http://english.etnews.com/device/2797572_1304.html


댓글삭제
삭제한 댓글은 다시 복구할 수 없습니다.
그래도 삭제하시겠습니까?
댓글 0
댓글쓰기
계정을 선택하시면 로그인·계정인증을 통해
댓글을 남기실 수 있습니다.

  • ABOUT
  • CONTACT US
  • SIGN UP MEMBERSHIP
  • RSS
  • 2-D 678, National Assembly-daero, 36-gil, Yeongdeungpo-gu, Seoul, Korea (Postal code: 07257)
  • URL: www.koreaittimes.com | Editorial Div: 82-2-578- 0434 / 82-10-2442-9446 | North America Dept: 070-7008-0005 | Email: info@koreaittimes.com
  • Publisher and Editor in Chief: Monica Younsoo Chung | Chief Editorial Writer: Hyoung Joong Kim | Editor: Yeon Jin Jung
  • Juvenile Protection Manager: Choul Woong Yeon
  • Masthead: Korea IT Times. Copyright(C) Korea IT Times, All rights reserved.
ND소프트